TiVald Sim Interface TSI v1.0  

TiVald Sim Interface TSI v1.0

Price: 0.00 USD

 
TiVald Sim Interface TSI v1.0

TSI v1.0 intended for operation with GSM SIM CARDS, PRE-PAY PHONE CARDS, SAT-TV CARDS, Clone SIM Cards.
 
Stock OUT & Product discontinued !!!



Having this device, you can independently keep copies of your Sim Card and easily them restore in a case of loss, edit a phonebook on a Sim Card through a computer even if for your phone there is no interface cable. If you use 2 different Sim Cards (different operators or different tariff plans) you can their copy both on one clone sim-card and be switched between them through the menu of phone, at all not switching off it ! Thus, it is possible to copy simultaneously up to 8 different Sim Cards on one, that will relieve you constantly to carry with itself different cards, and each time to remove - insert another

TiVald Sim Interface can work in two modes:
  1. SIM-READER - mode intended for reading / writing GSM SIM CARDS, and writing EEPROM 24Cxx inside in a CLONE SIM CARDS (PHOENIX / SMART MOUSE ).
  2. PROGRAM PIC - mode is intended for programming FLASH / EEPROM Memory in PIC processor inside in a CLONE SIM CARDS (JDM Programmer compatible).
Main Features:
  • Compatibility with PHOENIX / SMART MOUSE / DEJAN SIM SCAN / JDM Programmer.
  • Reading from GSM SIM CARDS IMSI, KI codes and write them in a clone SIM-CARD.
  • Reading and writing Phonebook and some parameters GSM SIM CARDS.
  • Possibility to program PIC processor inside in a CLONE SIM CARDS (JDM Mode).
  • In-Built converter 5 to 13 v for program PIC.
  • Possibility to use different frequencies 14.318 MHz, 7.159 MHz, 3.579 MHz at reading SIM CARDS.
  • LED for indication of a condition of a power supply.
  • LED for indication of a condition of a SIM DATA.
  • LED indicating a condition SIM RESET, in a mode of programming PIC indicating presence of voltage 13V on an input MCLR of the processor PIC.
  • External SIM Connector
Package contains:
  • TiVald Sim Interface (TSI v1.0)
  • RS232 cable to connect TSI v1.0 to PC com port
  • USB cable to connect TSI v1.0 to PC USB port
Note !!!
  1. The legislation of some countries forbids creation and-or use of clones GSM Sim-card and-or Sat-TV card (read laws !).
  2. All backUp function support A3A8 COMP128V1 SIM Card only.
  3. This SIM Card Back-UP device doesn't support newest SIM Card that uses COMP128V2 algorythm to code KI key.
  4. Some GSM SIM Cards from 2001 (COMP128V1) are Scan-Limited. It has limited running scan 65536 times. If the scan is over 65536, the SIM Card will be locked. This SIM Card will not work any more. 
User manual: tsi_v1_0.zip


« Back
Print