Ultimate

12/24 zone multifunctional alarm system with built in GSM communicator

The main characteristics of the device

• 12/24 zone multifunctional alarm system with built in GSM communicator
• handling two independent partitions that can also be armed/disarmed from an independent external device
• storing 576 events with date and time
• LCD keypad with transparent menu system, easy and quick to program
• Telephone calls with recordable voice messages (12 pieces of 5 second-long messages)
• Sending SMS messages with user and zone identification (e.g. OPENING THE SHOP: THOMAS )
• Signalling to monitoring station (CONTACT-ID)
• Differentiating 47 kinds of events
• 4 telephone numbers for the alarm calls and SMS
• 2 telephone numbers for Contact ID signals
• Handling 12 users (12 user codes with 4 – 6 digits)
• Arming/disarming by telephone, enquiry on state, relay control and voice recording
• Free Ultimate Remoter program for PC for the functions as follows
• Programming the module on serial port or by remote download
• Complete remote diagnostics, power supply, battery voltage, overcurrent monitoring, control of zones and outputs, inspection of event memory.

Technical information:

• Power supply: 16V-18V / 50Hz AC
• Average power consumption: 200mA
• Operational temperature: 0-60 °C
• Size: 202x124 mm
• Accessories:
  • GSM antenna (900/1800 MHZ) + cable
  • Plastic fixing mounts (4 pcs)
  • Accumulator cable
  • 1k Ohm resistor (40 pcs)
• Proposed external elements:
  • Transformer: 16V / 40 VA
  • Accumulator: 12V / 7Ah
  • Keypad / programmer: SATEL CA 64 LCD (maximum 8 pcs)
• Inputs:
  • 12 zones, maximum 24 sensors
  • Installation methods (can be chosen by each zone)
    • Short circuit activated
    • Activated by circuit opening
    • DEOL: closed by resistor (monitoring sabotage)
    • 1 or 2 sensors / zone
  • 2 inputs (A,B) for activation or deactivation with DEOL closure
  • 1 analogue voltage input (reserved)
• Outputs:
  • Keypad power supply (+KPD): 12V~0.5A DC
  • Sensor power supply (+12 V): 12V~0.5A DC
  • OUT1 (internal signalling device): 12V~1A DC
  • OUT2 (external signalling device): 12V~1A DC
  • RELAY1 (independent, NO/NC)
  • RELAY2 (independent, NO/NC)
  • RELAY3 (independent, NO/NC)
• Program connector RS–232 serial connector for PC programming
• Charging of accumulator Cyclical, voltage controlled charge, max. 800mA charging current

« Back