The main characteristics of the device
- 4 zone transmitting device with built-in GSM communicator
- Signalling to monitoring station (Contact-ID)
- Sending SMS to each event with separately adjustable text
- 4 telephone numbers for the alarm calls and SMS
- 2 telephone numbers for Contact ID signals
- Distinguishing event and restore on the zone inputs
- Arming/disarming by telephone, enquiry on state, relay control
- Power control, it signals to the monitoring station/owner in case of decreasing voltage
- Enclosed PagerRemoter program for PC for the functions as follows
- Programming the module on serial port or by remote download
- Complete remote diagnostics, monitoring inputs and outputs, battery voltage control
Technical information
Power supply: 12V DC
Maximum power consumption: 500 mA
Operating temperature: -20°C .. +60°C
Size: 70x100mm
Accessories: GSM antenna (900/1800 MHz)
Inputs: 4 pcs of contact inputs
Installation methods:
- Short-circuit activated
- Activated by circuit opening
Outputs: 2 pcs of relay outputs (independent, closing/opening)
Program connector: RS-232 serial connector for PC programming
GSM transmitting device: SONY-ERICSSON GM47-R5 industrial GSM module
Supply Content:
-
GSM Pager;
-
Antenna adapter cable (MMCX-FME);
-
GSM 900 MHz / PCN 1800 MHz antenna;
-
4 pieces of adhesive fixing supports;
-
Software for tuning GSM Pager (supplied on CD);
-
User / Installation manual (supplied on CD).
« Back |
GSM Pager